Dual-Radio-Wireless-AP-Bridge-Client-AWK-5222-Series-Moxa-vietnam.jpg

Dual-Radio Wireless AP/Bridge/Client AWK-5222 Series Moxa vietnam


Note: The AWK-5222 series is being phased out. The phase out period is August 4, 2016, to May 4, 2017. Last buy orders must be received before April 4, 2017. Please contact your Moxa sales representative if you have further questions.

Features and Benefits 

  • IEEE 802.11a/b/g compliant
  • Dual-radio design for 2.4 GHz and/or 5 GHz RF bands
  • Supports client-based Turbo Roaming and redundant roaming
  • -40 to 75°C operating temperature range (T models)

-------------------------------------------------------------------------------------------------------------------------------------------------------

Looking for a high-bandwidth solution?

Our AWK-5232 series complies with the IEEE 802.11n standard to fulfill the requirements of high-bandwidth wireless applications with up to 300 Mbps wireless data rate. Check out the AWK-5232 series product page for more information.

-------------------------------------------------------------------------------------------------------------------------------------------------------

Introduction 

Moxa’s wireless redundancy technology allows you to set up independent wireless connections to avoid interruptions in transmission, even if interference occurs on one of the supported frequencies. The AWK-5222 is equipped with the newest proprietary wireless redundancy technology, which has two independent RF modules, and supports a greater variety of wireless configurations and applications. The redundant wireless connections increase the reliability of the entire wireless network. The AWK-5222 is compliant with the industrial standards and approvals, covering operating temperature, power input voltage, surge, ESD and vibration. The AWK-5222 is rugged enough to help you establish the most robust wireless connection for critical industrial wireless applications. 

Redundancy to Increase System Reliability 

  • Dual DC power inputs and PoE
  • Dual-radio design with 2.4 and/or 5 GHz dual-band operation for redundant WLAN connections
  • Redundant roaming for fast and stable handoff
  • Ethernet redundancy via RSTP

Specifications for Industrial-grade Applications 

  • Industrial-grade QoS and VLAN for efficient data traffic management
  • Long-distance wireless transmission over 10 km
  • Integrated DI/DO for on-site monitoring and warnings
  • Signal strength LEDs for easy deployment and antenna alignment

Patent Marking

White Paper:

Expert Tips for Optimizing Industrial Wireless Networks

 

Compared with its popularity in everyday commercial environments, Wi-Fi has been slow to gain a foothold in industrial M2M applications. One of the main reasons that industrial customers are reluctant to move from wired to wireless is the problems associated with stability. Wireless transmission is NOT as reliable as wired transmission. However, by following certain best practices it is possible to set up a wireless network that will provide the level of reliability needed for M2M communication applications. In this whitepaper, we present eight expert tips that you can follow to optimize your wireless networks for industrial application environments...more

WLAN Interface
Standards IEEE 802.11a/b/g for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT(X)
IEEE 802.3u for 100BaseT(X)
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical) • DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
64QAM @ 54 Mbps, 16QAM @ 24/36 Mbps, QPSK @ 12/18 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBSK@ 1 Mbps
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
Operating Channels (central frequency) US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security • SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates 802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
TX Transmit Power 802.11b:
Typ. 23±1.5 dBm @ 1 to 11 Mbps
802.11g:
Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 36 Mbps, Typ. 18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54 Mbps
802.11a:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps
RX Sensitivity 802.11b:
-97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90 dBm @ 11 Mbps
802.11g:
-93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -88 dBm @ 18 Mbps, -84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -76 dBm @ 48 Mbps, -74 dBm @ 54 Mbps
802.11a:
-90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps, -85 dBm @ 18 Mbps, -83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -75 dBm @ 48 Mbps, -74 dBm @ 54 Mbps
Protocol Support
General Protocols Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
Interface
Default Antennas 2 dual-band omni-directional antennas, 2 dBi, RP-SMA (male)
Connector for External Antennas RP-SMA (female)
RJ45 Ports: 2, 10/100BaseT(X), auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Console Port RS-232 (RJ45-type)
Reset Present
LED Indicators PWR1, PWR2, PoE, FAULT, STATE, WLAN1, WLAN2, 10M, 100M
Alarm Contact (digital output) 1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing Metal, IP30 protection
Weight 1.1 kg
Dimensions 62 x 135 x 105 mm (2.4 x 5.3 x 4.1 in)
Installation DIN-Rail mounting (standard), Wall mounting (optional)
Environmental Limits
Operating Temperature Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5% to 95% (non-condensing)
Power Requirements
Input Voltage 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant)
Connector 10-pin removable terminal block
Power Consumption 12 to 48 VDC, 800 mA (max.)
Reverse Polarity Protection Present
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024,
IEC 61000-6-2/4
Radio EN 300 328, EN 301 893, FCC ID SLE-WAPA003
Note Please check Moxa’s website for the most up-to-date certification status.
Reliability
MTBF (mean time between failures) 291,367 hrs
Warranty
Warranty Period 5 years
Details www.anhnghison.com