Fiber-Bypass-Unit-OBU-102-Series-Moxa-vietnam.jpg

Fiber Bypass Unit OBU-102 Series Moxa vietnam


Features and Benefits

Download Moxa 2014 IES brochure!

  • Supports Fast, Gigabit, and 10 Gigabit Ethernet fiber connections in SC/ST/LC connectors
  • Redundant dual 12/24/48 VDC power inputs
  • IP30 metal housing
  • -20 to 70°C operating temperature range
  • DIN-rail mounting ability
  • Ultra low power consumption 0.72 W

Introduction

Moxa’s OBU-102 fiber optical bypass units add bypass relay functionality to any network node. In linear topologies, a single power outage or node failure can take out an entire chunk of the network, because communications to all the network nodes further down the line are also cut. With relay bypass, that node is instead simply bypassed in the event of a failure, and the rest of the network is unaffected.
The OBU-102 sits between a node and the network to add bypass relay functionality to any network switches that do not already support this important function. In normal operations, the OBU-102 simply acts as a gateway that forwards network traffic to and from the network switch. However, if power is lost, the OBU-102 will bypass the unpowered switch and simply pass network traffic to the next switch in the relay.

Bypass Properties
Optical Switching Time Max. 10 ms
Insertion Loss Max. 1.6 dB
Interface
Fiber Ports 100M/1G/10G fiber in SC/ST/LC connector, single mode
Rotary Switches For configuring the boot delay interval
Power Requirements
Input Voltage 12/24/48 VDC, redundant dual inputs
Operating Voltage 9.6 to 60 VDC
Overload Current Protection 1100 mA @ 48 VDC
Connection 2 removable 2-contact terminal block
Reverse Polarity Protection Present
Physical Characteristics
Housing Metal
IP Rating IP30 protection
Dimensions 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight 700 g (1.55 lb)
Installation DIN-rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature -20 to 70°C (-4 to 158°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications
Safety UL 508
EMC EN 55032 Class A
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 0.5 kV
IEC 61000-4-6 CS: Signal: 10 V
IEC 61000-4-8
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Warranty
Warranty Period 2 years
Details www.anhnghison.com