Fieldbus-Gateways-MGate-4101-MB-PBS-Series-Moxa-vietnam.jpg

Fieldbus Gateways MGate 4101-MB-PBS Series Moxa vietnam


Features and Benefits 

  • Protocol conversion between Modbus and PROFIBUS
  • Windows utilities with innovative QuickLink function for automatic configuration within minutes
  • Redundant dual DC power inputs and relay output supported
  • Embedded data packet analyzer
  • Powerful and visual diagnostic tool
  • -40 to 75°C wide operating temperature models available

 

OverviewMoxa_Gateway

The MGate 4101-MB-PBS gateway provides a communication portal between PROFIBUS PLCs (e.g. Siemens S7-400 and S7-300 PLCs) and Modbus devices. With the QuickLink feature, I/O mapping can be accomplished within a matter of minutes. All models are protected with a rugged metallic casing, are DIN-rail mountable, and offer optional built-in optical isolation.

 

QuickLink and Windows Utilities for Easy Setup and Traffic Monitoring

The QuickLink windows utility uses a serial console port to connect to the MGate 4101-MB-PBS and makes configuration and operation as easy as possible. QuickLink can finish the configuration in just a few minutes by passively detecting Modbus requests with the AutoLearning function, and performing error-free I/O mapping with the AutoMapping feature. QuickLink drastically reduces Modbus-to-PROFIBUS integration time when compared to conventional I/O mapping, which can easily require days to complete. Additionally, embedded monitoring tools can maintain logs of Modbus communication packets and assist in troubleshooting.

 

Redundant Power Inputs

The MGate 4101-MB-PBS has dual power inputs for greater reliability. The power inputs allow simultaneous connections to two live DC power sources, so that continuous operation is provided even if one power source fails. The higher level of reliability makes these advanced Modbus-to-PROFIBUS gateways ideal for demanding industrial applications.

 

Warning by Relay Output

A relay output is provided for the power input status. The relay output gives maintenance engineers an additional tool for troubleshooting and maintenance.

 

Dimensions

 

PROFIBUS Interface
Protocol PROFIBUS DP-V0 Slave
Number of Ports 1
Data Rate 9600 bps to 12 Mbps
Connector DB9 female
Isolation 2 kV (built-in)
DIP Switch For termination
Rotary Switch PROFIBUS address 0-99 (address 100-125 supported through software configuration)
Modbus Interface
Protocol Modbus RTU/ASCII Master/Slave
Number of Ports 1
Serial Standards RS-232/422/485, software selectable
Connectors DB9 male
ESD Protection 15 kV for all signals
RS-485 Data Direction Control ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485 1 kΩ, 150 kΩ
Terminator for RS-485 120 Ω
Data Bits 7, 8
Stop Bits 1, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS, DTR/DSR (RS-232 only)
Baudrate 50 bps to 921.6 kbps
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Configuration Options Serial Console, Windows Utility
Utility MGate Manager for Windows 2000, Windows XP, Server 2003, Vista, Server 2008 (x86/x64), Windows Server 2008 R2, Windows 7/8/8.1 (x86/x64), Windows Server 2012 (x64), Windows 2012 R2
Support QuickLink, Paging
Physical Characteristics
Housing Metal, IP30
Weight 500 g (1.10 lb)
Dimensions 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
Environmental Limits
Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Vibration IEC 60068-2-6, IEC 60068-2-64
Shock IEC 60068-2-27
Drop IEC 60068-2-32
Power Requirements
Input Voltage 12 to 48 VDC
Input Current MGate 4101-MB-PBS: 340 mA @ 12 VDC; 130 mA @ 48 VDC
MGate 4101I-MB-PBS: 375 mA @ 12 VDC; 140 mA @ 48 VDC
Power Connector Terminal block
Standards and Certifications
Safety UL 60950-1, EN 60950-1
Hazardous Location Class 1 Division 2, ATEX, IECEx
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m
IEC 61000-4-8 PFMF
MTBF (mean time between failures)
Time 513,139 hrs
Standard Telcordia SR332
Warranty
Warranty Period 5 years
Details www.anhnghison.com