Fieldbus-Interface-Boards-CP-602E-I-Series-Moxa-vietnam.jpg

Fieldbus Interface Boards CP-602E-I Series Moxa vietnam


Features and Benefits

  • CAN 2.0A and CAN 2.0B supported
  • Two independent CAN communication ports
  • CAN transfer rate up to 1 Mbps
  • 2 kV electrical isolation
  • LED for transmit/receive status on each port
  • Optional 120 ohm terminal resistor for CAN bus network
  • DLL library and examples included
  • Windows driver provided

 

Overview

Moxa’s new CP-602E-I CAN (Controller Area Network) interface board supports the PCI Express interface. As a stand-alone CAN controller, the CP-602E-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP-602E-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature (CP-602E-I-T only) and 2 kV isolation make the boards suitable for use in harsh industrial environments.

Dimensions

 

Pin Assignment

Hardware
Connectors DB9 male x 2
CAN Controller NXP SJA1000
CAN Transceiver PCA82C251
CAN Specification CAN 2.0 A/B
Signal Support CAN_H, CAN_L, GND
Transfer Rate 1 Mbps
Max. Number of Boards per PC 4
Electrical Isolation 2 kV
Termination Resistor 120 ohm (selected by jumper)
Driver Support
Windows Windows 2000, Windows XP/2003/Vista/2008 (x86/x64)
Software
Libraries Visual C/C++, Borland C/C++
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class B
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11
MTBF (mean time between failures)
Time 4,645,502 hrs
Standard Telcordia (Bellcore) SR-332
Power Requirements
Input Current 780 mA @ 5 VDC
Warranty
Warranty Period 5 years
Details www.anhnghison.com