PCIe-UPCI-PCI-Serial-Cards-CP-116E-A-Moxa-vietnam.jpg

PCIe/UPCI/PCI Serial Cards CP-116E-A Moxa vietnam


Features and Benefits Moxa Intelligent RS-485

  • PCI Express x1 compliant
  • Serial communication speed up to 921.6 kbps
  • 128-byte FIFO and on-chip H/W, S/W flow control
  • Variety of connection cables and boxes available for RS-232/422/485
  • Drivers provided for the latest versions of Windows, Linux, and Unix
  • Easy maintenance with on-board LED display and management software
  • 15 kV ESD and 4 kV surge protection onboard

 

Overview

The CP-116E-A is a smart PCI Express multiport serial board designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-116E-A is compatible with all popular operating systems, and each of its 8 serial ports supports data rates of up to 921.6 kbps, and provides full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-116E-A works with PCI Express x1, allowing the board to be installed in any PCI Express slot.

 

Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending)

Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.

Dimensions (unit=mm)

 

Hardware
Comm. Controller 16C550C compatible
Bus PCI Express x1
Connector VHDCI 68
Serial Interface
Number of Ports 16
Serial Standards RS-232/422/485
Max. No. of Boards per PC 4
Serial Line Protection
Surge Protection 4 kV
Performance
Baudrate 50 bps to 921.6 kbps
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS, XON/XOFF
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
RS-485-4w TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND
RS-485-2w Data+(B), Data-(A), GND
Physical Characteristics
Dimensions 97.9 x 88.9 mm (3.86 x 3.50 in)
Driver Support
Windows Windows 2000/XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64)
Linux Linux 2.4.x, 2.6.x, 3.x
Unix-like Systems QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64)
Note: Please refer to Moxa’s website for the latest driver support information.
Environmental Limits
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature -20 to 85°C (-4 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class B
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4
MTBF (mean time between failures)
Time 310,993 hrs
Standard Telcordia (Bellcore) TR/SR
Power Requirements
Input Current 2,733 mA @ 3.3 VDC
Warranty
Warranty Period 5 years
Details www.anhnghison.com