Power-Substation-Computers-DA-682A-Moxa-vietnam.jpg

Power Substation Computers DA-682A Moxa vietnam


FeaturesDA-720 Efficient IIoT Data Processing

  • 2nd generation Intel core processors (Sandy Bridge)
  • Built-in DDR3 SDRAM and industrial DOM
  • 6 Gigabit Ethernet ports for network redundancy
  • 2 PCI expansion slots for expansion modules
  • 1 CompactFlash socket for storage expansion
  • 4 high speed, system-bootable USB 2.0 ports
  • 19 inch 2U rack-mountable case
  • 100/240 VAC power inputs
  • Ready-to-Run Linux or Windows Embedded Standard 7 platform
  • Fanless design

 

Overview

The DA-682A series of computers are x86 platforms with VGA, 6 gigabit Ethernet ports, CompactFlash, USB, and two PCI ports for DA Series expansion modules. The DA-682A comes in a standard 19-inch 2U rack-mountable case.
With their robust design, DA-682A computers are specialized for industrial automation applications: power substations, transportation and shipping, and oil and gas production and supply.
The DA-682A runs either Linux or Windows Embedded Standard 7, providing a friendly environment for developing sophisticated application software. Moxa’s ready-to-run software and readily available after-service support makes the programmer’s job easier, helping programmers develop bug-free code quickly and at a lower cost. In addition, the DA-682A also comes with three different CPU options, and basic models that allow system designers to install the DOM, RAM, and operating system according to their specific requirements. This is particularly flexible for building custom industrial solutions.
The DA-682A comes with 2 PCI ports that accept DA series expansion modules. Moxa provides a variety of communication modules for the DA series, including an 8-port RS-232/422/485 module, a 4-port 10/100 Mbps LAN module, and a universal PCI expansion module. This friendly design gives users the advantage of being able to swap out modules quickly and easily, making the DA-682A an ideal solution for a wide array of industrial automation applications. 

Application Note

 

Efficient IIoT Data Processing with High I/O Density Computers Moxa Smart Recovery

 

DA-720 Efficient IIoT Data ProcessingWith more and more companies implementing IIoT applications, the demand to connect hundreds or thousands of devices to industrial automation systems has increased dramatically. The DA-720, a high-performance industrial-grade x86 platform, is ideal for such applications. It is based on the lntel® 6th Gen Skylake processor and provides a high density of gigabit Ethernet and serial ports in a 19-inch 2U rack-mountable case, making it an ideal choice for IIoT applications in industrial automation systems.
 
Find out how Moxa’s high I/O density rackmount computers can streamline your power, railway, and factory automation applications.
......
more

 


White Paper

How to Get the Best Out of the IIoT with Predictive Maintenance Proactive Monitoring

 

Download White PaperThe Industrial Internet of Things (IIoT) is shaping the way industrial applications are designed and implemented today. The IIoT is ushering in a new era of operational efficiency, information transparency, and economic growth. Innovative ideas on how to collect data, how to transform data, and how to use the data to increase efficiency and reduce costs are sprouting up all around us. The IIoT has bridged the gap between the physical and digital worlds and has created one combined space that provides limitless possibilities. In addition, the relentless pursuit of excellence in the IIoT world has renewed an interest in predictive maintenance solutions that ensure higher equipment reliability and system uptime.......more

 


White Paper

Moxa Smart Recovery

Intelligent Automation for the Maintenance and Recovery of Software Platforms

Smart ReoceryAutomation advances in industrial processes increasingly involve using industrial PCs for the control and monitoring of every sort of machinery and process. Yet as industrial PCs penetrate ever further into the automation stack, the problem of data loss and system corruption becomes a critical consideration both for the security issues raised as well as overall system availability. In this white paper we examine the software and hardware features that constitute an effective, fully automated, BIOS initiated, block-level software recovery solution that can be used across any industrial environment, whether following emergency crashes or for automated preventive maintenance......more

 


White Paper

Making Smart Substations Even Smarter: Enhancing Substation Reliability, Availability, and Maintainability

Smart Substation Computer White PaperThis paper sketches out a few of the more important concerns that electricity suppliers should account for when planning substation upgrades. The focus is on how best to increase the reliability, availability, and maintainability of power substation automation networks within the context of the IEC 61850 vision, to give electricity suppliers a clear idea of the design procedures, device tolerances, and hardware and software features they should expect from the engineers and manufacturers who design and build their networking and computing devices.......more

 


White Paper

Using MMS and SNMP to Integrate IT Management for Substation Automation

Using MMS and SNMP to Integrate IT Management for Substation AutomationThe devices that electrical substation automation systems are built from depend on highly precise, time-critical communications. Substation thus often use highly specialized monitoring systems to tackle this problem, but can approach it using different technologies. The most up-to-date, “smart” substations use the Manufacturing Messaging Specification (MMS) for communications among IEC 61850 intelligent electronic devices (IEDs), allowing SCADA to monitor and control IED states as well as process switchgear and transformer data directly. However, IT networking devices have been increasingly applied in IEC 61850 systems, and this equipment communicates using SNMP. Consequently, in the modern substation automation industry it’s clear that, for the time being, SNMP and MMS will continue to exist side-by-side. For designers and integrators of electrical substation equipment, bringing both MMS and SNMP support to IT equipment is an ideal, one-size fits-all alternative that allows for the greatest flexibility and adaptability around........more

Hardware Specifications
Computer
CPU 2nd generation Intel core processors (Sandy Bridge) 
• Intel Celeron 827E, 1.4 GHz single-core processor
• Intel Celeron 847E, 1.1 GHz dual-core processor
• Intel Core i7-2610UE, 1.5 GHz dual-core processor
OS Linux or Windows Embedded Standard 7 (pre-installed) 
Note: The OS is pre-installed.
System Chipset Intel HM65
BIOS 64 Mbit Flash BIOS, PCI Plug & Play, ACPI
System Memory 8 GB capacity, 1 GB (LX) / 2 GB (W7E, 32-bit) pre-installed: 1 slot of 4 GB DDR3-1066/1333 SO-DIMM SDRAM
USB USB 2.0 hosts x 2, system bootable, Type A connector
Storage
Built-in 2 GB (LX) / 8 GB (W7E, 32-bit) industrial DOM for read-only OS volume
Storage Expansion • 1 x CompactFlash socket
• 2 x SATA-300 connector
Display
Graphics Controller Integrated graphics with built-in Intel 915GME, and built-in Intel Extreme Graphics 2 technology
Display Memory Dynamic video memory (shares up to 32 MB of system memory)
Display Interface 1 VGA output (DB15 female connector)
Resolution CRT display mode with pixel resolution up to 2548 x 1536 at 75 Hz
Ethernet Interface
LAN Auto-sensing 10/100/1000 Mbps ports x 6
Magnetic Isolation Protection 1.5 kV built-in
LEDs
System Power, Storage
LAN 100/1000M mode
Programmable 8 LEDs
Communication Module A x 16, Module B x 16
Switches and Buttons
Power Button On/Off (on rear panel)
Reset Button Soft reboot (on front panel)
Physical Characteristics
Housing SECC sheet metal (1 mm)
Weight 7 kg (15.56 lb)
Dimensions 440 x 315 x 90 mm (17.32 x 12.40 x 3.54 in) (without rackmount ears)
Mounting Standard 19-inch rack
Environmental Limits
Operating Temperature -10 to 60°C (14 to 140°F)
Storage Temperature -20 to 80°C (-4 to 176°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Anti-Vibration 2 Grms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti-Shock 20 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
Input Voltage 100 to 240 VAC auto-ranging (47 to 63 Hz for AC input)
Power Consumption 30 W (full loading)
Standards and Certifications
Safety UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1, CCC (GB4943, GB9254, GB17625.1)
EMC EN 61000-6-2/6-4
EMI CISPR 22, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GH: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: Signal: 10 V
IEC 61000-4-8: 20 A/m
IEC 61000-4-9: 300 A/m
IEC 61000-4-11: (AC models only)
Green Product RoHS, CRoHS, WEEE
Reliability
Alert Tools Built-in buzzer and RTC (real-time clock) with battery lithium backup
Automatic Reboot Trigger Built-in watchdog timer, configurable for restarts at 1 to 255 second intervals
MTBF (mean time between failures)
Time 527,124 hrs
Standard Telcordia (Bellcore) Standard TR/SR
Warranty
Warranty Period 3 years
Details www.anhnghison.com
Software Specifications
Linux
OS Linux Debian 7
Web Server (Apache) Allows you to create and manage web sites; supports PHP and XML
File System EXT2, JFFS2
Internet Protocol Suite TCP, UDP, IPv4, SNMPv1/v2c/v3, ICMP, ARP, HTTP, CHAP, PAP, SSH 1.0/2.0, SSL, DHCP, NTP, NFS, Telnet, FTP, TFTP, PPP, PPPoE
Internet Security OpenVPN, iptables firewall
Secure Shell for Remote Access SSH allows remote logins to a secure encrypted console from any connected network
Dial-up Networking PPP Daemon for Linux that allows Unix machines
to connect to the Internet through dialup lines, using the Point-to-Point
Protocol (PPP). Works with ‘chat’, ‘dip’, and ‘diald’, among (many)
others. Supports IP, TCP, UDP, and (for Linux) IPX (Novell).
File Server Enables remote clients to access files and other resources over the network
Watchdog A watchdog timer that triggers a system reset upon software freezes, for both specific applications and system-wide failures.
Application Development Software • Moxa API Library (Watchdog timer, Moxa serial I/O control)
• GNU C/C++ cross-compiler
• GNU C library
• Perl
Windows Embedded Standard 7
Core OS • Windows 7 Embedded, 32 bit
• Sensor and Location Platform
• Remote Procedure Call
Applications and Services Development • .Net Framework 3.5
• Remote Desktop Protocol 7.1
• COM OLE Application Support
• COM+ Application Support
• MSMQ
Internet Services • Internet Explorer 8.0
• IIS 7.0
File Systems and Data Storage • Windows Data Access Components
• Windows Backup and Restore
Diagnostics • Common Diagnostic Tools
• Problem Reports and Solutions
Fonts • Chinese (Trad. and Simp.), Middle East, South East Asian, and South Asian Fonts
• True Type Fonts
Graphics and Multimedia • MPEG DTV-DVD Audio Decoder (MPEG-2, AAC)
• MPEG Layer-3 Audio Codecs(MP3)
• MPEG4 Decoders
• Windows Media Video VC-1 (WMV) Codecs
• DirectX and Windows Device Experience
• Windows Media Player 12
International • IME Simplified Chinese Support
• IME Traditional Chinese Support
Management • Group Policy Management
• Windows Management Instrument (WMI)
• Windows Update
Networking • Extensible Authentication Protocol (EAP)
• Internet Authentication Service
• Telnet Server
• Bluetooth
• Domain Services
• Network Access Protection
• Network and Sharing Center
• Quality of Service
• Remote Access Service (RAS)
• Telephony API Client
• Windows Firewall
• Wireless Networking
Security • Credential Roaming Service
• Credentials and Certificate Management
• Windows Authorization Manager (AZMAN)
• Windows Security Center
• Active Directory Rights Management
• Security Base
• Encrypted File System (EFS)
Embedded Features • Enhanced Write Filter(EWF)
• File-Based Write Filter (FBWF)
• Message Box Default Reply
• Registry Filter
• WSDAPI for .NET
Embedded Self-Health Diagnostics SNMP-based remote scripting layer for monitoring, reporting, and control