RISC-IA261-I-IA262-I-Moxa-vietnam.jpg

RISC IA261-I/IA262-I Moxa vietnam


Features and Benefits Moxa UC-8100 Wireless Computer Product Review

  • Cirrus Logic EP9315 ARM9 CPU, 200 MHz
  • 128 MB RAM on-board, 32 MB flash disk
  • VGA interface for field site monitoring
  • 2 KV digitally isolated RS-232/422/485 serial ports
  • Dual 10/100 Mbps Ethernet for network redundancy
  • Dual 2 KV digitally isolated CAN ports with CANopen protocol support
  • 8+8 DI/DO with 3 KV optical isolation protection
  • 12 to 48 VDC redundant power input design
  • Supports CompactFlash and USB 2.0 hosts
  • Ready-to-run Linux or WinCE 6.0 platform
  • -40 to 75°C wide temperature models available

 

Overview

The IA261-I/262-I embedded computers come with 2 (IA262-I) or 4 (IA261) RS-232/422/485 serial ports, dual CANbus ports (IA262-I only), dual Ethernet ports, 8 digital input channels, 8 digital output channels, VGA output, 2 USB hosts, and a CompactFlash socket. The computers are housed in a compact, IP40 protected, industrialstrength aluminum case.

 

The IA261-I/262-I computers use the Cirrus Logic EP9315 ARM9, 32-bit, 200 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but will not generate too much heat. The built-in 32 MB NOR Flash ROM and 128 MB SDRAM provide enough memory to run your application software directly on the IA261-I/262-I.

 

With its built-in VGA output interface, the IA261-I/262-I are suitable for use with SCADA systems in industrial applications, such as manufacturing automation, production line process monitoring, and mining automation, that require VGA and HMI features.

 

The IA261-I/262-I computers support RS-232/422/485, CANbus, digital I/O, come with 2 KV isolation protection, and have dual LAN ports, making them ideal as communication platforms for industrial applications that require network redundancy. In addition to the standard models, wide temperature (-40 to 75°C) models are available for use in harsh industrial automation environments.

 

The IA260 embedded computers come pre-installed with either the open standard Linux OS, or the more common WinCE OS. Software written for a desktop PC can be easily ported to the IA260 platform by using a common compiler, without needing to modify the code, and the software you develop for your own applications can be stored in the IA260’s flash memory

White Paper

Building the Industrial Cloud:The Immediate Future of M2M Technology

 

Building the Industrial Cloud:The Immediate Future of M2M TechnologyIn 2013, substantial steps towards building the Internet of Things at last began to materialize. In this white paper, Moxa examines the sorts of technology industrial networks will be relying on as they begin to build and deploy machine-to-machine networks. Software automations, hardware optimizations, and integrated platforms that fully exploit the convergence of these two main branches of system design are examined closely, to give IA and IT engineers a better idea of what challenges and obstacles they should be preparing for at the dawn of this new technological epoch........more

 

------------------------------------------------------------------------------------------------------------------------------------------------------

Hardware Specifications
Computer
CPU Cirrus EP9315 ARM9 CPU, 200 MHz
OS (pre-installed) Windows CE 6.0 or Linux
DRAM 128 MB onboard
Flash 32 MB onboard
USB USB hosts x 2, compliant with USB 2.0 (OHCI) type A connectors
Storage
Storage Expansion CompactFlash slot
Display
Graphics Controller EP9315 internal graphics accelerator engine with TTL graphical signal support
Display Memory Dynamic video memory (shares system memory)
Display Interface CRT interface for VGA output, DB15 female connector
Resolution 1024 x 768, 8 bits
Ethernet Interface
LAN 2 auto-sensing 10/100 Mbps ports (RJ45)
Magnetic Isolation Protection 1.5 kV built-in
Serial Interface
Serial Standards 2 or 4 RS-232/422/485 ports, software-selectable (DB9 male)
ESD Protection 4 kV for all signals
Isolation 2 kV digital isolation
Console Port RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate 50 bps to 921.6 kbps (supports non-standard baudrates; see user's manual for details)
Serial Signals
RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422 TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Data+, Data-, GND
Digital Input
Input Channels 8, source type
Input Voltage 0 to 30 VDC
Digital Input Levels for Dry Contacts • Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts • Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (COM to DI)
Connector Type 10-pin screw terminal block (8 points, COM, GND)
Isolation 3 kV optical isolation
Digital Output
Output Channels 8, sink type
Output Current Max. 200 mA per channel
On-state Voltage 24 VDC nominal, open collector to 30 V
Connector Type 9-pin screw terminal block (8 points, GND)
Isolation 3 kV optical isolation
CANbus Communication (IA262 models only)
Interface Dual optically isolated CAN2.0A/2.0B compliant ports
CAN Controller Phillips SJA1000T
Signals CAN-H, CAN-L
Isolation 2 kV digital isolation
Speed 10 kbps to 1 Mbps
Connector Type DB9 male
LEDs
System Power, Ready, Storage
LAN 10M/Link x 2, 100M/Link x 2 (on connector)
Serial TxD x 4, RxD x 4
IA261-I: P1 to P4 for serial ports
IA262-I: P1 to P2 for serial ports, P3 to P4 for CAN ports
Switches and Buttons
Reset Button Supports "Reset to Factory Default"
Physical Characteristics
Housing Aluminum, industrial vertical form factor
Weight 950 g
Dimensions 60 x 115 x 152 mm (2.36 x 4.53 x 5.98 in)
Mounting DIN rail, wall
Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Anti-vibration 5 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti-shock 50 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
Input Voltage Redundant power input design
PWR1: 12 to 48 VDC (3-pin terminal block)
PWR2: 12 to 48 VDC (power jack with thread)
Power Consumption With no load on USB ports: 5.8 W
• 240 mA @ 24 VDC
• 480 mA @ 12 VDC
With full load on USB ports: 11 W
• 450 mA @ 24 VDC
• 900 mA @ 12 VDC
Standards and Certifications
Safety UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1
EMC EN 61000-6-4, EN 61000-3-2 Class D, EN 61000-3-3, EN 61000-6-2, FCC Part 15 Subpart B Class A
Green Product RoHS, CRoHS, WEEE
Reliability
Alert Tools Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures) IA261-I: 118,752 hrs
IA261-I: 131,832 hrs
Warranty
Warranty Period 5 years
Details www.anhnghison.com
Note These hardware specifications describe the embedded computer unit itself, but not its official accessories. In particular, the wide temperature specification does not apply to accessories such as power adapters and cables.
Software Specifications
Linux
OS Linux 2.6.23
File System JFFS2, NFS, Ext2, Ext3
Internet Protocol Suite TCP, UDP, IPv4, SNMPv1, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, TFTP, PPP, PPPoE
Internet Security OpenVPN, iptables firewall
Web Server (Apache) Allows you to create and manage web sites
Terminal Server (SSH) Provides secure encrypted communications between two un-trusted hosts over an insecure network
Dial-up Networking PPP Daemon for Linux that allows Unix machines to connect to the Internet through dialup lines, using the PPP protocol, as a PPP server or client. Works with 'chat', 'dip', and 'diald', among (many) others. Supports IP, TCP, UDP, and (for Linux) IPX (Novell).
Watchdog Features a hardware function to trigger system reset in a user specified time interval (Moxa API provided)
Application Development Software • Moxa API Library (Watchdog timer, Moxa serial I/O control, Moxa DI/DO API)
• GNU C/C++ cross-compiler
• GNU C library
• GDB source-level debugging server
Software Protection Encryption tool for user executable files (based on patented Moxa technology)
Windows Embedded CE 6.0
OS Windows Embedded CE 6.0
File System FAT (for on-board flash)
Internet Protocol Suite TCP, UDP, IPv4, SNMPv2, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP
Web Server (WinCE IIS) Supports ASP, ISAPI Secure Socket Layer (SSL 2/3) and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions
Dial-up Networking Supports RAS client API and PPP, Extensible Authentication Protocol (EAP), and RAS scripting
File Server Enables remote clients to access files and other resources over the network
Watchdog Features a hardware function to trigger system reset in a user specified time interval. (Moxa API provided)
Application Development Software • Moxa WinCE 6.0 SDK
• Moxa API Library
• C Libraries and Run-times
• Component Services (COM and DCOM)
• Microsoft® .NET Compact Framework 2.0
• XML, including DOM, XQL, XPATH, XSLT, SAX, SAX2
• SOAP Toolkit Client
• Winsock 2.2