Single-Radio-Wireless-AP-Bridge-Client-AWK-3131-Series-Moxa-vietnam.jpg

Single-Radio Wireless AP/Bridge/Client AWK-3131 Series Moxa vietnam


Note: The AWK-3131 series is being phased out. The phase out period is August 4, 2016, to May 4, 2017. Last buy orders must be received before April 4, 2017. Please contact your Moxa sales representative if you have further questions.

Features and Benefits 

  • IEEE 802.11a/b/g/n compliant
  • Up to 300 Mbps data rate
  • MIMO technology increases data throughput and range
  • Supports client-based Turbo Roaming
  • One RJ45/SFP Gigabit combo port
  • -40 to 75°C operating temperature range (T models)

-------------------------------------------------------------------------------------------------------------------------------------------------------

Looking for more benefits?

Our new AWK-3131A series offers the following additional benefits:

  • Avoids downtime due to electrical interference with power and antenna port isolation
  • Provides uninterrupted operation with our wireless redundancy technology—AeroLink Protection
  • Utilizes 5-GHz DFS channels to avoid oversaturation of signals on channels and to provide stable wireless connections

Check out the AWK-3131A series product page for more information.

-------------------------------------------------------------------------------------------------------------------------------------------------------

Introduction 

The AWK-3131 3-in-1 industrial wireless AP/bridge/client meets the growing need for faster data transmission speeds by supporting IEEE 802.11n technology with a net data rate of up to 300 Mbps. The AWK-3131 is compliant with the industrial standards and approvals, covering operating temperature, power input voltage, surge, ESD and vibration. The two redundant DC power inputs increase the reliability of the power supply, and the AWK-3131 can be powered via PoE to make deployment easier. The AWK-3131 can operate on either the 2.4 or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.

Improved Higher Data Rate and Bandwidth 

  • High-speed wireless connectivity with up to 300 Mbps data rate
  • MIMO technology to improve the capability of transmitting and receiving multiple data streams
  • Increased channel width with channel bonding technology

Specifications for Industrial-grade Applications 

  • Industrial-grade QoS and VLAN for efficient data traffic management
  • Integrated DI/DO for on-site monitoring and warnings
  • Signal strength LEDs for easy deployment and antenna alignment

Patent Marking

White Paper:

Expert Tips for Optimizing Industrial Wireless Networks

 

Compared with its popularity in everyday commercial environments, Wi-Fi has been slow to gain a foothold in industrial M2M applications. One of the main reasons that industrial customers are reluctant to move from wired to wireless is the problems associated with stability. Wireless transmission is NOT as reliable as wired transmission. However, by following certain best practices it is possible to set up a wireless network that will provide the level of reliability needed for M2M communication applications. In this whitepaper, we present eight expert tips that you can follow to optimize your wireless networks for industrial application environments...more

WLAN Interface
Standards IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical) • DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates supported)
Operating Channels (central frequency) US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security • SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates 802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
TX Transmit Power 802.11b:
1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm)
802.11g:
6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm)
54 Mbps: Typ. 15 dBm (± 1.5 dBm)
802.11a:
6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm)
54 Mbps: Typ. 14 dBm (± 1.5 dBm)
RX Sensitivity 802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps,
-80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
TX Transmit Power MIMO (per connector) 802.11a/n (20/40 MHz):
MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm)
802.11g/n (20 MHz):
MCS15 20 MHz: Typ. 14 dBm (± 1.5 dBm)
RX Sensitivity MIMO 802.11a/n:
-68 dBm @ MCS15 40 MHz,
-69 dBm @ MCS15 20 MHz,
-70 dBm @ MCS7 40 MHz,
-71 dBm @ MCS7 20 MHz
802.11g/n:
-69 dBm @ MCS15 20 MHz,
-71 dBm @ MCS7 20 MHz
Protocol Support
General Protocols Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
Interface
Default Antennas 2 dual-band omni-directional antennas, 2 dBi, RP-SMA (male)
Connector for External Antennas RP-SMA (female)
RJ45 Ports 1, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Fiber Ports 1, 1000Base SFP slot
Console Port RS-232 (RJ45-type)
LED Indicators PWR1, PWR2, PoE, FAULT, STATE, signal strength, WLAN, LAN
Alarm Contact (digital output) 1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing Metal, IP30 protection
Weight 970 g
Dimensions 54 x 135 x 105 mm (2.1 x 5.3 x 4.1 in)
Installation DIN rail mounting (standard), wall mounting (optional)
Environmental Limits
Operating Temperature Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5% to 95% (non-condensing)
Power Requirements
Input Voltage 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant)
Connector 10-pin removable terminal block
Power Consumption 12 to 48 VDC, 700 mA
Reverse Polarity Protection Present
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024
Radio EN 300 328, EN 301 893, DSPR (Japan), FCC ID SLE-WAPN001
Note Please check Moxa’s website for the most up-to-date certification status.
Reliability
MTBF (mean time between failures) 388,581 hrs
Warranty
Warranty Period 5 years
Details www.anhnghison.com