Single-Radio-Wireless-AP-Bridge-Client-AWK-3131A-Series-Moxa-vietnam.jpg

Single-Radio Wireless AP/Bridge/Client AWK-3131A Series Moxa vietnam


Features and Benefits 

  • IEEE 802.11a/b/g/n AP/bridge/client support
  • Seamless roaming with Turbo Roaming
  • Complete redundancy with AeroLink Protection
  • Integrated antenna and power isolation
  • -40 to 75°C operating temperature range (-T models)
  • 5 GHz DFS channel support

Introduction 

The AWK-3131A 3-in-1 industrial wireless AP/bridge/client meets the growing need for faster data transmission speeds by supporting IEEE 802.11n technology with a net data rate of up to 300 Mbps. The AWK-3131A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power supply, and the AWK-3131A can be powered via PoE to make deployment easier. The AWK-3131A can operate on either the 2.4 or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.

Advanced 802.11n Industrial Wireless Solution

  • 802.11a/b/g/n compliant AP/bridge/client for flexible deployment
  • Software optimized for long distance (LoS, 1 km) wireless
    communication with external high-gain antenna (available on 5 GHz)
  • Complete redundancy with AeroLink Protection
  • Supports 60 clients connected concurrently
  • DFS channel support allows a wider range of 5 GHz channel
    selection to avoid existing wireless infrastructure and interference

Advanced Wireless Technology

  • Seamless roaming with Client-based Turbo Roaming for < 150 ms
    roaming recovery time between APs (Client mode)
  • Supports AeroLink Protection for creating a redundant wireless link
    (< 300 ms recovery time) between AP and clients (Client mode)

Industrial Ruggedness

  • Integrated antenna and power isolation designed to provide 500 V
    insulation protection against external electrical interference
  • Hazardous location wireless communication with Class I Div II and
    ATEX Zone 2 certifications
  • -40 to 75°C wide operating temperature models (-T) provided for
    smooth wireless communication in harsh environments

Patent Marking

White Paper:

Five Critical Elements of Uninterrupted Wireless Connectivity for Moving Equipments Download

To ensure seamless wireless communications for the smooth functioning of your moving equipments, there are some critical aspects that you need to pay special attention to when they deploy wireless solutions in their moving equipments such as AGV systems...more 

WLAN Interface
Standards IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical) • DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 1 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates supported)
Operating Channels (central frequency) US:
2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)*
5.500 to 5.700 GHz (8 channels, excluding 5.600 to 5.640 GHz)*
5.745 to 5.825 GHz (5 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)*
5.500 to 5.700 GHz (11 channels)*
JP:
2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)*
5.500 to 5.700 GHz (11 channels)*
*DFS (Dynamic Frequency Selection) channel support In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
Security • SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP, and AES)
Transmission Rates 802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
Transmitter Power 802.11b:
Typ. 26±1.5 dBm @ 1 Mbps, Typ. 26±1.5 dBm @ 2 Mbps
Typ. 26±1.5 dBm @ 5.5 Mbps, Typ. 25±1.5 dBm @ 11 Mbps
802.11g:
Typ. 23±1.5 dBm @ 6 to 24 Mbps, Typ. 22±1.5 dBm @ 36 Mbps
Typ. 20±1.5 dBm @ 48 Mbps, Typ. 19±1.5 dBm @ 54 Mbps
802.11n (2.4 GHz):
Typ. 23±1.5 dBm @ MCS0/8 20 MHz,
Typ. 18±1.5 dBm @ MCS7/15 20 MHz
Typ. 23±1.5 dBm @ MCS0/8 40 MHz,
Typ. 17±1.5 dBm @ MCS7/15 40 MHz
802.11a:
Typ. 23±1.5 dBm @ 6 to 24 Mbps, Typ. 21±1.5 dBm @ 36 Mbps
Typ. 20±1.5 dBm @ 48 Mbps,Typ. 18±1.5 dBm @ 54 Mbps
802.11n (5 GHz):
Typ. 23±1.5 dBm @ MCS0/8 20 MHz,
Typ. 18±1.5 dBm @ MCS7/15 20 MHz
Typ. 23±1.5 dBm @ MCS0/8 40 MHz,
Typ. 18±1.5 dBm @ MCS7/15 40 MHz
Note Based on regional regulations, the maximum transmission power allowed on the UNII bands is restricted in the firmware, as indicated below:
Table
Receiver Sensitivity 802.11b:
-93 dBm @ 1 Mbps, -93 dBm @ 2 Mbps
-93 dBm @ 5.5 Mbps, -88 dBm @ 11 Mbps
802.11g:
-88 dBm @ 6 Mbps, -86 dBm @ 9 Mbps
-85 dBm @ 12 Mbps, -85 dBm @ 18 Mbps
-85 dBm @ 24 Mbps, -82 dBm @ 36 Mbps
-78 dBm @ 48 Mbps, -74 dBm @ 54 Mbps
802.11n (2.4 GHz):
-70 dBm @ MCS7 20 MHz, -69 dBm @ MCS15 20 MHz
-67 dBm @ MCS7 40 MHz, -67 dBm @ MCS15 40 MHz
802.11a:
-90 dBm @ 6 Mbps, -88 dBm @ 9 Mbps
-88 dBm @ 12 Mbps, -85 dBm @ 18 Mbps
-81 dBm @ 24 Mbps, -78 dBm @ 36 Mbps
-74 dBm @ 48 Mbps, -72 dBm @ 54 Mbps
802.11n (5 GHz):
-69 dBm @ MCS7 20 MHz, -71 dBm @ MCS15 20 MHz
-63 dBm @ MCS7 40 MHz, -68 dBm @ MCS15 40 MHz
Protocol Support
General Protocols Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, DHCP, VLAN, STP/RSTP
Interface
Default Antennas 2 dual-band omni-directional antennas, 2 dBi, RP-SMA (male)
Connector for External Antennas RP-SMA (female), 500 V insulation
LAN Ports 1, RJ45, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Console Port RS-232 (RJ45-type)
Reset Present
LED Indicators PWR1, PWR2, PoE, FAULT, STATE, SIGNAL*, WLAN, LAN
*signal strength indicator
Alarm Contact (digital output) 1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs 2 electrically isolated inputs• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Management
Device Management Wireless Search Utility, MXconfig, SNMP
Network Monitoring MXview
Physical Characteristics
Housing Metal, IP30 protection
Weight 860 g (1.9 lb)
Dimensions 52.7 x 135 x 105 mm (2.08 x 5.32 x 4.13 in)
Installation DIN-rail mounting (standard), wall mounting (optional)
Environmental Limits
Operating Temperature Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5% to 95% (non-condensing)
Power Requirements
Input Voltage 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet Plus (IEEE 802.3af compliant)
Input Current 0.6 A @ 12 VDC;0.15 A @ 48 VDC
Connector 10-pin removable terminal block, 500 V insulation
Power Consumption 7.2 W
Reverse Polarity Protection Present
Standards and Certifications
Safety UL 60950-1, EN 60950-1
Hazardous Location UL/cUL Class I Division 2, ATEX Zone 2
EMC EN 61000-6-2/6-4
EMI CISPR 22, FCC Part 15B Class B
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Radio EN 301 489-1/17, EN 300 328, EN 301 893, TELEC, FCC ID SLE-WAPN008, KC, RCM
Note Please check Moxa’s website for the most up-to-date certification status.
MTBF (mean time between failures)
Time 770,854 hrs
Standard Telcordia SR332
Warranty
Warranty Period 5 years
Details www.anhnghison.com