Single-Radio-Wireless-AP-Bridge-Client-AWK-4131-Series-Moxa-vietnam.jpg

Single-Radio Wireless AP/Bridge/Client AWK-4131 Series Moxa vietnam


Note: The AWK-4131 series is being phased out. The phase out period is August 4, 2016, to May 4, 2017. Last buy orders must be received before April 4, 2017. Please contact your Moxa sales representative if you have further questions.

Features and Benefits  

  • IEEE 802.11a/b/g/n compliant
  • One M12/SFP Gigabit combo port
  • Up to 300 Mbps data rate
  • M12 anti-vibration connector
  • Supports client-based Turbo Roaming
  • MIMO technology increases data throughput and range
  • Rugged IP68-rated housing and -40 to 75°C operating temperature

-------------------------------------------------------------------------------------------------------------------------------------------------------

Looking for more benefits?

Our new AWK-4131A series offers the following additional benefits:

  • Avoids downtime due to electrical interference with power and antenna port isolation
  • Provides uninterrupted operation with our wireless redundancy technology—AeroLink Protection
  • Utilizes 5-GHz DFS channels to avoid oversaturation of signals on channels and to provide stable wireless connections

Check out the AWK-4131A series product page for more information.

-------------------------------------------------------------------------------------------------------------------------------------------------------

Introduction 

The AWK-4131 is a 3-in-1 industrial wireless AP/bridge/client that meets the growing need for faster data transmission speeds and wider coverage by supporting IEEE 802.11n technology with a net data rate of up to 300 Mbps. The AWK-4131 is compliant with the industrial standards and approvals, covering operating temperature, power input voltage, surge, ESD and vibration. With a wide -40 to 75°C operating temperature and dust-tight/weatherproof IP68-rated design, the AWK-4131 allows you to extend existing wired networks to outdoor locations. The AWK-4131 can operate on either the 2.4 or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.

Higher Data Rate and Greater Bandwidth 

  • High-speed wireless connectivity with up to 300 Mbps data rate
  • MIMO technology to improve the capacity of multiple data stream transmits and receives
  • Increased channel width with channel bonding technology

Features for Critical Environments 

  • Industrial-grade QoS and VLAN for efficient data traffic management
  • IP68-rated metal housing and -40 to 75°C wide operating temperature
  • PoE and dual DC power inputs
  • Integrated DI/DO for on-site monitoring and warnings

Patent Marking

White Paper:

Expert Tips for Optimizing Industrial Wireless Networks

 

Compared with its popularity in everyday commercial environments, Wi-Fi has been slow to gain a foothold in industrial M2M applications. One of the main reasons that industrial customers are reluctant to move from wired to wireless is the problems associated with stability. Wireless transmission is NOT as reliable as wired transmission. However, by following certain best practices it is possible to set up a wireless network that will provide the level of reliability needed for M2M communication applications. In this whitepaper, we present eight expert tips that you can follow to optimize your wireless networks for industrial application environments...more

WLAN Interface
Standards IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical) • DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 bps to BPSK @ 6.5 Mbps (multiple rates supported)
Operating Channels (central frequency) US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security • SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates 802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
TX Transmit Power 802.11b:
1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm)
802.11g:
6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm)
54 Mbps: Typ. 15 dBm (± 1.5 dBm)
802.11a:
6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm)
54 Mbps: Typ. 14 dBm (± 1.5 dBm)
RX Sensitivity 802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps,
-80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
TX Transmit Power MIMO (per connector) 802.11a/n (20/40 MHz):
MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm)
MCS15 40 MHz: Typ. 12 dBm (± 1.5 dBm)
802.11g/n (20 MHz):
MCS15 20 MHz: Typ. 14 dBm (± 1.5 dBm)
RX Sensitivity MIMO 802.11a/n:
-68 dBm @ MCS15 40 MHz, -69 dBm @ MCS15 20 MHz,
-70 dBm @ MCS7 40 MHz, -71 dBm @ MCS7 20 MHz
802.11g/n:
-69 dBm @ MCS15 20 MHz, -71 dBm @ MCS7 20 MHz
Protocol Support
General Protocols Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols ARP, BOOTP, DHCP, dynamic VLAN-Tags for 802.1X-Clients, STP/RSTP (IEEE 802.1D/w)
Interface
Default Antennas 2 dual-band omni-directional antennas, 5 dBi at 2.4 GHz, 2 dBi at 5 GHz, N-type (male)
Connector for External Antennas N-type (female)
Fiber Ports 1, 1000Base SFP slot
M12 Ports 1, 10/100/1000BaseT(X), auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection (M12 female type)
Console Port RS-232 (waterproof RJ45-type)
LED Indicators PWR, FAULT, STATE, WLAN, LAN
Alarm Contact (digital output, M12 male connector) 1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs (M12 connector, male) 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing Metal, IP68 protection
Weight 1.8 kg
Dimensions 224 x 148 x 65 mm (8.8 x 5.8 x 2.5 in)
Installation Wall mounting (standard), DIN rail mounting (optional), pole mounting (optional)
Environmental Limits
Operating Temperature -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5% to 100% (non-condensing)
Power Requirements
Input Voltage 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant)
Connector M12 connector with A-coding
Power Consumption 12 to 48 VDC, 890mA (max.)
Reverse Polarity Protection Present
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024
Radio EN 300 328, EN 301 893, DSPR (Japan), FCC ID SLE-WAPN001
Note Please check Moxa’s website for the most up-to-date certification status.
Reliability
MTBF (mean time between failures) 367,406 hrs
Warranty
Warranty Period 5 years
Details www.anhnghison.com