GEOKON đặt trụ sở tại Lebanon, New Hampshire, Hoa Kỳ và hoạt động trên phạm vi toàn cầu thông qua mạng lưới các đại lý. Công ty được thành lập vào năm 1979 và hiện có hơn 100 nhân viên.


Trong những năm qua, GEOKON đã nổi lên là Người dẫn đầu Thế giới về Công nghệ Dây rung ™ nhờ chất lượng, dịch vụ khách hàng nhạy bén và thiết kế hàng đầu trong ngành của chúng tôi. Nhiều loại thiết bị đo địa kỹ thuật của chúng tôi được sản xuất tại nhà máy của chúng tôi ở Hoa Kỳ, bởi đội ngũ nhân viên gồm các thợ máy và lắp ráp được đào tạo, có trình độ và kinh nghiệm.
Đặc biệt, GEOKON, thông qua sự đổi mới và kinh nghiệm, đã phát triển một dòng cảm biến dây rung vượt trội ở bất kỳ đâu trên thế giới. Những thiết bị có độ tin cậy cao này đã góp phần không nhỏ vào việc ngày càng chấp nhận dây rung trên toàn thế giới như một công nghệ phù hợp nhất cho các ứng dụng địa kỹ thuật.

Công nghệ dây rung
Tần số dao động cộng hưởng của một dây thép căng phụ thuộc vào độ căng hoặc lực căng của dây. Sự phụ thuộc cơ bản này được sử dụng trong nhiều cấu hình khác nhau để đo biến dạng, tải trọng, lực, áp suất, nhiệt độ và độ nghiêng.
Cảm biến dây rung nổi tiếng với độ ổn định lâu dài. Ưu điểm của cảm biến dây rung so với các loại thông thường chủ yếu nằm ở đầu ra của cảm biến, là tần số chứ không phải điện áp.
Tần số có thể được truyền qua cáp dài (> 2000 m) mà tín hiệu không bị suy giảm đáng kể do sự thay đổi điện trở của cáp, có thể phát sinh từ sự xâm nhập của nước, dao động nhiệt độ, điện trở tiếp xúc hoặc rò rỉ xuống đất. Yếu tố này, cùng với sự sang trọng và chắc chắn của thiết kế GEOKON dẫn đến các cảm biến thể hiện độ ổn định lâu dài tuyệt vời và lý tưởng cho các phép đo lâu dài trong môi trường bất lợi.

Các ứng dụng
Các thiết bị do GEOKON sản xuất được sử dụng chủ yếu để giám sát sự an toàn và ổn định của các công trình dân dụng và khai thác mỏ như đập đất, đập bê tông, đường hầm, lỗ mở mỏ, nền móng, cọc, kè, tường chắn, mái dốc, hệ thống tàu điện ngầm, nhà máy điện ngầm, cầu cống, đường ống, trục, đào tường bùn, đào giằng, cột chống, kho chứa chất thải hạt nhân, sơ đồ xử lý nước ngầm và những thứ tương tự.
GEOKON sản xuất một dòng thiết bị địa kỹ thuật hoàn chỉnh bao gồm máy đo độ giãn, máy đo áp, máy đo độ căng, máy đo độ nứt, máy đo khớp, cảm biến lực, cảm biến độ lún, cảm biến áp suất, máy đo độ nghiêng và máy đo dữ liệu và nhiều mặt hàng tùy chỉnh khác được thực hiện theo đơn đặt hàng.
Phần sản phẩm của trang web này cung cấp mô tả ngắn gọn về các dòng sản phẩm GEOKON tiêu chuẩn. Tài liệu quảng cáo riêng lẻ với thông tin bổ sung và chi tiết khác, có sẵn dưới dạng tệp PDF có thể tải xuống, đi kèm với mỗi sản phẩm. Nếu những sản phẩm này không đáp ứng được nhu cầu của bạn, các thành viên của đội ngũ nhân viên giàu kinh nghiệm của chúng tôi sẵn sàng làm việc với bạn để sản xuất thiết bị đo đạc tùy chỉnh cho các ứng dụng đặc biệt. Gọi hoặc viết thư để biết thêm thông tin và tìm hiểu tại sao GEOKON lại nổi tiếng về chất lượng, độ tin cậy và dịch vụ cao không gì sánh được trong ngành.

GEOKON Vietnam - Đại lý GEOKON Vietnam

GEOKON is located in Lebanon, New Hampshire, USA and operates on a worldwide basis through a network of agencies. The company was founded in 1979 and currently has over 100 employees.
Over the years, GEOKON has emerged as The World Leader in Vibrating Wire Technology™ due to our quality, responsive customer service and industry-leading designs. Our broad range of geotechnical instrumentation is manufactured at our factory in the USA, by a staff of trained, qualified and experienced machinists and assemblers.
In particular, GEOKON, through innovation and experience, has developed a line of vibrating wire sensors unsurpassed anywhere in the world. These highly reliable devices have contributed in no small way to the growing worldwide acceptance of vibrating wire as the most suitable technology for geotechnical applications.
 
Vibrating Wire Technology 
The resonant frequency of vibration of a tensioned steel wire is dependent on the strain or tension in the wire. This fundamental dependency is utilized in a variety of configurations for the measurement of strain, load, force, pressure, temperature, and tilt.
Vibrating wire sensors are well known for their long-term stability. The advantage of vibrating wire sensors over more conventional types lies mainly in the sensor output, which is a frequency rather than a voltage.
Frequencies can be transmitted over long (>2000 m) cables without appreciable degradation of the signal caused by variations in cable resistance, which can arise from water penetration, temperature fluctuations, contact resistance or leakage to ground. This factor, coupled with the elegance and ruggedness of GEOKON designs results in sensors which exhibit excellent long-term stability and which are ideally suited for long-term measurements in adverse environments.
 
Applications
Instruments manufactured by GEOKON are used primarily for monitoring the safety and stability of civil and mining structures such as earth dams, concrete dams, tunnels, mine openings, foundations, piles, embankments, retaining walls, slopes, subway systems, underground powerhouses, bridges, culverts, pipelines, shafts, slurry wall excavations, braced excavations, tiebacks, nuclear waste repositories, ground water remediation schemes and the like.
GEOKON manufactures a complete line of geotechnical instruments including extensometers, piezometers, strain gages, crackmeters, jointmeters, load cells, settlement sensors, pressure cells, inclinometers and dataloggers and many other custom items made to order.
The products section of this web site provides a brief description of the standard GEOKON product lines. Individual brochures with additional information and further details, available as downloadable PDF files, accompany each product. If these products do not meet your needs, members of our experienced staff are ready to work with you to produce custom instrumentation for special applications. Call or write for more information and find out why GEOKON has a reputation for high quality, reliability and service unequaled in the industry.
 
GEOKON Products ranges:
 
• Strain gauges
• Displacement Transducers
• Extensometers
• Piezometers 
• Settlement sensors:
• Pressure Cells
• Load cells.
• Inclinometers 
• Tiltmeters – Pendulums
• Readouts:
• Dataloggers, Software
• Stressmeters
• Fiber Optic Strain Gauges
• Temperature Products