Embedded-Serial-to-Ethernet-Modules-MiiNePort-E1-Series-Moxa-vietnam.jpg

Embedded Serial-to-Ethernet Modules MiiNePort E1 Series Moxa vietnam


Features and Benefits

  • Same size as an RJ45 connector—only 33.9 x 16.25 x 13.5 mm MiiNePort embedded serial device servers
  • Extremely low power consumption—only 160 mA @ 3.3 VDC input
  • Uses the MiiNe, Moxa's second generation SoC
  • NetEZ technology makes integration incredibly easy
  • Versatile choice of operation modes: Real COM, RFC2217, TCP, and UDP

 

 

Overview

Moxa's MiiNePort E1 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices with minimal integration effort. The MiiNePort E1 is empowered by the MiiNe, Moxa's second generation SoC, which supports 10/100 Mbps Ethernet, up to 921.6 Kbps serial baudrate, a versatile selection of ready-to-use operation modes, and requires only a small amount of power. By using Moxa's innovative NetEZ technology, the MiiNePort E1 can be used to convert any device with a standard serial interface to an Ethernet enabled device in no time. In addition, the MiiNePort E1 is the size of an RJ45 connector, making it easy to fit into virtually any existing serial device.

 

 

The MiiNe—Moxa's 2nd Generation SoC

The MiiNe was created to provide manufacturers with a competitive embedded serial-to-Ethernet solution. The MiiNePort E1, which uses the MiiNe for its SoC, is one of the world's tiniest embedded device servers, and has the lowest power consumption of any similar product. The MiiNe has the following features:
1. Designed for 1 or 2-port serial-to-Ethernet applications
2. Uses a 32-bit ARM 7 core
3. Uses Moxa's own advanced UART technology
4. Has 2 MB Flash and 4 MB SDRAM memory built in

 

 

NetEZ Technology

Moxa's NetEZ technology gives serial device manufacturers a range of powerful tools for integrating Ethernet capability into serial devices:

 

 

EXTrigger : Want to troubleshoot your network with ease? Use the MiiNePort's EXTrigger button to reset network settings with just one push.


SCM : Need an easy tool to configure the network through serial communication inside the device? Try MiiNePort's friendly SCM (Serial Command Mode).


AutoCFG : Tired of spending a large amount of time and effort setting up a network? Not anymore! The MiiNePort's AutoCFG makes auto-configuration during manufacturing possible.


MCSC : Ever wanted your device to be a server and client at the same time? The MiiNePort's MCSC (Multi-channel Serial Communication) provides dual connections and dual channels for multi-task applications!.

Moxa's NetEZ technology makes the MiiNePort E1 the world's most user-friendly embedded device server by promising ease-of-use with minimal integration work required.


 







Pin Assignment


 




MiiNePort E1 Starter Kit 


The MiiNePort E1 Starter Kit includes the MiiNePort E1 module, an evaluation board, power adaptor, software, and serial and Ethernet cables to allow quick and easy evaluation of all embedded device server functions. The evaluation board is equipped with serial, Ethernet, digital I/O, and power circuits to help you test your MiiNePort E1 modules and applications.

Form Factor
Type Drop-in module
Dimensions 33.9 x 16.25 x 13.5 mm (1.33 x 0.64 x 0.53 in)
Weight 9 g
System Information
CPU 32-bit ARM Core
RAM 4 MB built in
Flash 2 MB built in
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector RJ45 (with magnetics)
Magnetic Isolation Protection 1.5 KV built-in
LEDs 10BASE-T & 100BASE-TX Link Activity, Fault/In-Use
Serial Interface
Number of Ports 1
Transmission Format Standard TTL
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS, DTR/DSR, XON/XOFF
Baudrate (non-standard baudrates supported) MiiNePort E1: 50 bps to 230.4 Kbps
MiiNePort E1-H: 50 bps to 921.6 Kbps
Serial Signals
TTL TxD, RxD, RTS, CTS, RST (reset circuit), GND
Digital I/O Pins
GPIO 3 configurable I/O pins (1 DO, 1 DI, 1 DI/O)
Software
Network Protocols ICMP, ARP, IP, TCP, UDP, DHCP, HTTP, SNMP V1, SMTP, TFTP, Auto IP, Telnet, BOOTP
Configuration Options Web Console, Serial Console (Serial Command Mode), Telnet Console, Windows Utility
Windows RealCOM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x
Linux Real TTY Drivers Linux kernel 2.4.x, 2.6.x, 3.x
Operation Modes TCP Server, TCP Client, TCP Mixed, UDP, RealCOM, RFC 2217, MCSC
Environmental Limits
Operating Temperature
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature (package included) -40 to 60°C (-40 to 140°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage 3.3 VDC (±5%)
Power Consumption
• MiiNePort E1: 160 mA @ 3.3 VDC max.
• MiiNePort E1-H: 195 mA @ 3.3 VDC max.
Standards and Certifications
EMC
• Radiated & conducted emmisions: Complies with Class B limits of EN 55022:1998
• Direct & Indirect ESD: Complies with EN 55024:1998
• Electrical Fast Transient/Burst Immunity: Complies with
EN 55024:1998
• Power Frequency Magnetic Field Immunity: Co
Shock 500 g’s for non-operational shock
Vibration 20 g’s for non-operational vibration
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures) 5,515,294 hrs
Warranty
Warranty Period 5 years
Details www.anhnghison.com