Wireless-Device-Servers-NPort-Z2150-Series-Moxa-vietnam.jpg

Wireless Device Servers NPort Z2150 Series Moxa vietnam


Features and Benefits 

  • IEEE 802.15.4/ZigBee compliant
  • Network topologies: Mesh/Star/Cluster tree
  • 128-bit AES hardware encryption
  • Enhanced surge protection for serial and power
  • Dual DC power inputs (NPort Z3150 only)
  • Easy-to-use configuration utility

 

 

 

 

Overview

The NPort Z2150 are IEEE 802.15.4/ZigBee compliant, providing a reliable wireless solution for serial-to-ZigBee networks requiring minimal wiring presence. The NPort Z2150 can be configured as a ZigBee coordinator (ZC), a ZigBee router (ZR), or a ZigBee end device (ZED). Any serial device can be connected to the NPort Z2150 and exchange data via PAN. An user-friendly utility is provided to configure the device type and network settings in simple steps.

ZigBee Network

 

Surge-protected Serial and Power Lines

Surge, which is typically caused by high voltages that result from switching and lightning transients, is a common threat to all electrical devices. Moxa’s leading-edge surge immunity solution, which is applied to the NPort Z2150/Z3150’s serial and Ethernet lines, is tested and proven compliant with IEC 61000-4-5. This surge protection provides a robust solution that can protect electrical devices from voltage spikes and withstand electrically noisy environmental conditions.

Dimensions

 

 

Pin Assignment

 

ZigBee Interface
RF Standard 802.15.4/ZigBee compliant
Frequency Band 2.4 GHz
RF Data Rate 250 kbps
Rx sensitivity -96 dBm
Tx Power 4.5 dBm (Max)
Transmission Distance Up tp 100 m (open space)
Antenna 2 dBi
RF Channel 16 channels
Device Type Coordinator, Router (NPort Z2150 only), End Device (NPort Z2150 only)
Network Topology Star, Mesh, Cluster tree
Security 128-bit AES encryption algorithms
Hardware
DIP Switch Console/Operation Mode
SW1 Pull high/low resister, Termination for RS-422/485.
Reset Button Reset to default
Serial Interface
Number of Ports 1
Serial Standards RS-232/422/485
Connector DB9 male
Serial Line Protection 1 kV surge protection
RS-485 Data Direction Control ADDC (Automatic Data Direction Control)
Serial Communication Parameters
Data Bits 8
Stop Bits 1, 2
Parity None, Even, Odd
Flow Control RTS/CTS
Baudrate 50 bps to 230.4 kbps
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Data+, Data-, GND
Software
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Configuration ZigBee Configuration Utility
Firmware Upgrade ZigBee Configuration Utility
Physical Characteristics
Housing Aluminum
Weight 340 g (0.75 lb)
Dimensions Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity 5 to 95% RH
Power Requirements
Input Voltage 12 to 48 VDC
Input Current 45 mA @ 12 V
Standards and Certifications
Safety UL 60950-1
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal:0.5 kV
IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
Radio CE (ETSI EN 301 893, ETSI EN 300 328, ETSI EN 301 489-1-17, ETSI EN 301 489-1)
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures)
Time 2,542,774 hrs
Standard Telcordia (Bellcore) Standard TR/SR
Warranty
Warranty Period 5 years
Details www.anhnghison.com