pulser-discs-electro-sensor-vietnam-dai-ly-electro-sensor-vietnam-dai-ly-ans.png

Dương Huỳnh Thảo My

Sales Engineer ANS Vietnam

Cellphone  +84 938.140.396
I E-mail I  my.duong@ansgroup.asia  
Skype I  my.duong@ansgroup.asia  

Anh Nghi Sơn là đại lý chính thức phân phối các loại cảm biến ELECTRO SENSOR

Luôn luôn hài lòng khi đến với ANS!

Electro Sensors Vietnam tự hào được sinh ra và mang trong mình sứ mệnh là đáp ứng tất cả các nhu cầu cũng như giúp Quý khách hàng tối ưu hóa các giải pháp khắc phục mọi vấn đề trong ngành công nghiệp điện tử tự động một cách hiệu quả nhất. Chuyên nghiệp về kỹ thuật, chăm sóc khách hàng và sự hỗ...

Sự thành công của quý vị là niềm vinh hạnh đối với chúng tôi.

Pulser Discs

Features

  • Non-contact sensing
  • Up to 0.5" gap distance (standard)
  • End-of-shaft mounting
  • Nylon, PVC, aluminum, or stainless steel
  • Custom sizes and number of pulses
  • Impervious to water, grease, dust, oil, dirt, etc.


Pulser Discs are compatible with all Electro-Sensors' shaft speed sensors. The large gap allows maximum flexibility in mounting the sensor, making them ideal for environments where there is vibration, dirt, dust, grease, or water. The  number of pulses per revolution generated by the Pulser Disc and sensor depends on the sensor used. Simply center-drill and tap the end of the shaft to be monitored and secure the Pulser Disc onto the shaft.

Generally, a Hall Effect sensor will produce one pulse for every two magnets, since the sensor  switches between high and low in the presence of both a north and a south pole magnet. A Magnetoresistive sensor will generate one square wave pulse per magnet. Special discs can be custom manufactured to meet specific needs. Steel targets can be substituted for magnets on aluminum or PVC discs. These targets work well with proximity or magnetic pick-up sensors.

Pulser Discs are available in two standard configurations:

  • Face Read: 0.25" thick discs with 0.25" or 0.5" diameter magnets mounted on the face (for large gap distance).
  • Edge Read: 0.625" thick discs with either 0.25" or 0.5" diameter magnets mounted around the circumference.