Embedded Serial-to-Ethernet Modules MiiNePort E3 Series Moxa vietnam
Hãng sản xuất: Moxa
0902937088
Embedded Serial-to-Ethernet Modules MiiNePort E3 Series Moxa vietnam
Features and Benefits .jpg)
- IEEE 802.3af compliant PoE pass-through
- Use Moxa’s high quality and reliable second generation MiiNe SoC
- Versatile choice of operation modes fulfill specific application requirements
- Green design with extremely low power consumption
- MiiNePort NetEZ Technology makes integration incredibly easy
- Highly compact embedded device module
Overview
Moxa’s MiiNePort E3 series embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices with minimal integration effort. The MiiNePort E3 is empowered by the MiiNe, Moxa’s second generation SoC, which supports 10/100 Mbps Ethernet, up to 921.6 kbps serial baudrate, a versatile selection of ready-to-use operation modes, and requires only a small amount of power. By using Moxa’s innovative NetEZ technology, the MiiNePort E3 can be used to convert any device with a standard serial interface to an Ethernet enabled device in no time. In addition, the MiiNePort E3 is a compact embedded device server with an RJ45 connector, making it easy to fit into virtually any existing serial device.
The MiiNe—Moxa’s 2nd Generation SoC.png)
.png){kind=small}
The MiiNe was created to provide manufacturers with a competitive embedded serial-to-Ethernet solution. The MiiNePort E3, which uses the MiiNe for its SoC, is a compact embedded device server that has the lowest power consumption of similar products. The MiiNe has the following features:
‧Designed for serial-to-Ethernet applications
‧Uses an ARM core
‧Uses Moxa’s own advanced UART technology
‧2 MB Flash and 4 MB SDRAM memory built in
Dimensions
Pin Assignment
| • Form Factor | |
| Type | Pin header module |
| Dimensions | 35 x 52.5 x 18 mm (1.38 x 2.07 x 0.71 in) |
| Weight | 12 g (0.03 lb) |
| • System Information | |
| CPU | 32-bit ARM Core |
| RAM | 4 MB built in |
| Flash | 2 MB built in |
| • Ethernet Interface | |
| Number of Ports | 1 |
| Speed | 10/100 Mbps, auto MDI/MDIX |
| Connector | RJ45 (magnetic) |
| Magnetic Isolation Protection | 1.5 kV built-in |
| LEDs | 10BASE-T & 100BASE-TX Link Activity |
| PoE Pass-through | 802.3af compliant |
| • Serial Interface | |
| Number of Ports | 1 |
| Transmission Format | Standard TTL |
| • Serial Communication Parameters | |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS, DTR/DSR, XON/XOFF |
| Baudrate | MiiNePort E3: 50 bps to 230.4 kbps MiiNePort E3-H: 50 bps to 921.6 kbps Note: Non-standard baudrates supported |
| • Serial Signals | |
| TTL | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RST (reset circuit), GND |
| • Digital I/O Pins | |
| GPIO | 4 configurable I/O pins |
| • Software | |
| Network Protocols | ICMP, ARP, IPv4, TCP, UDP, DHCP, HTTP, SNMP V1, SMTP, TFTP, Auto IP, Telnet, BOOTP |
| Configuration Options | Web Console, Serial Console (Serial Command Mode), Telnet Console, Windows Utility |
| Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Fixed TTY Drivers | SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X |
| Linux Real TTY Drivers | Linux 2.4.x, 2.6.x, 3.x |
| Operation Modes | Real COM, TCP Server, TCP Client, UDP, Ethernet Modem, RFC2217 |
| NetEZ Function | EZPower, EZPage, SCM (Serial Command Mode), AutoCFG |
| • Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Storage Temperature (package included) | -40 to 60°C (-40 to 140°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements | |
| Input Voltage | 3.3 to 5 VDC |
| Input Current | 157 mA @ 3.3 VDC |
| • Standards and Certifications | |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class B |
| EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power 1 kV; Signal 0.5 kV IEC 61000-4-5 Surge: Power 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 |
| Vibration | IEC 60068-2-6, 5-25.7 Hz: ±15 mm; 25.7-500 Hz: 20g; 3 hours/axis |
| Shock | IEC 60068-2-27, 500g/2ms |
| Drop | IEC 60068-2-34IEC 60068-2-32, ISTA-2A |
| • Reliability | |
| MTBF (mean time between failures) | Time: 3,608,031 hrs Standard: Telcordia (Bellcore) TR/SR |
| • Warranty | |
| Warranty Period | 5 years |
| Details | www.anhnghison.com |
![Cables-CBL-M12[FF5P]-OPEN-100-IP67-Moxa-vietnam.jpg](/Images/products/thumb/Cables-CBL-M12[FF5P]-OPEN-100-IP67-Moxa-vietnam.jpg)
