Embedded Serial-to-Ethernet Modules NE-4120S Moxa vietnam
Hãng sản xuất: Moxa
Embedded Serial-to-Ethernet Modules NE-4120S Moxa vietnam
Features and Benefits
- 10/100 Mbps Ethernet interface
- Up to 230.4 kbps baudrate support
- Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP
- DHCP, BootP, Static IP, and ARP supported
- SNMP and e-mail alerts for event trapping and notification
- Half the size of a credit card—only 57 × 40 mm
- Low power consumption at 1.5W, with single +5V input
Overview
Moxa’s NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa’s embedded device servers can be used to convert any device with a standard serial interface to an Ethernet-enabled device in no time. The NE-4100 embedded device servers support 10/100 Mbps Ethernet, and provide ready-to-use operation modes, including TCP Server, TCP Client, and UDP. In addition, a Real COM driver is included for backward compatibility with legacy software.
SNMP and E-mail Alerts for Event Trap and Notification
NE-4100 embedded device servers can be configured to send an SNMP trap or e-mail under the following conditions:
‧Cold/warm start
‧Password authentication failure
‧Change in DSR/DCD line signal
‧Change in IP address
‧Change in password
Dimensions and Pin Assignment
• Form Factor | |
Type | Ready-to-go pin header modules |
Dimensions | 57 × 40 mm (2.24 x 1.57 in) |
Weight | 20 g |
• Ethernet Interface | |
Number of Ports | 1 |
Speed | 10/100 Mbps, auto MDI/MDIX |
Magnetic Isolation Protection | 1.5 kV built-in |
Connector | 5-pin pin header |
• Serial Interface | |
Number of Ports | 2 |
Serial Standards | • Port 1:RS-232 • Port 2:TTL console port |
RS-485 Data Direction Control | ADDC® (automatic data direction control) |
• Serial Communication Parameters | |
Data Bits | 5, 6, 7, 8 |
Stop Bits | 1, 1.5, 2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF |
Baudrate | 110 bps to 230.4 kbps |
• Serial Signals | |
TTL | • Port 1: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND • Port 2: TxD, RxD, GND |
RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-2w | Data+, Data-, GND |
• Digital I/O Pins | |
GPIO | 4 programmable I/O pins |
• Software | |
Network Protocols | ICMP, ARP, IPv4, TCP, UDP, DHCP, Telnet, HTTP, SNMP V1/V2c, SMTP |
Configuration Options | Web Console, Serial Console, Telnet Console, Windows Utility |
Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
Fixed TTY Drivers | SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X |
Linux Real TTY Drivers | Linux 2.4.x, 2.6.x, 3.x |
Operation Modes | Real COM, TCP Server, TCP Client, UDP |
• Environmental Limits | |
Operating Temperature | Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature | -40 to 60°C (-40 to 140°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Altitude | Up to 2000 m |
Note | Please contact Moxa if you require products guaranteed to function properly at higher altitudes. |
• Power Requirements | |
Input Voltage | 5 VDC (±5%) |
Power Consumption | 290 mA @ 5 VDC max. |
• Standards and Certifications | |
EMC | CE, FCC |
EMI | EN 55022 Class B, FCC Part 15 Subpart B Class A |
EMS | EN 55024, EN 61000-4-2 (ESD), EN 61000-4-3 (RS), EN 61000-4-4 (EFT), EN 61000-4-5 (Surge), EN 61000-4-6 (CS), EN 61000-4-8, EN 61000-4-11 |
Green Product | RoHS, CRoHS, WEEE |
• Reliability | |
Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
MTBF (mean time between failures) | 289,573 hrs |
• Warranty | |
Warranty Period | 5 years |
Details | www.anhnghison.com |