Liên hệ tư vấn

Ms. Liên

lien.ans@ansvietnam.com

0902937088

lientran87

Thông tin sản phẩm
Thông số kỹ thuật

Smart Wireless I/O ioLogik 2512-HSPA Moxa vietnam

Features and Benefits

Front-end intelligence with Click&Go Plus control logic, up to 48 rules
Active communication with MX-AOPC UA Server
Automatically complement disconnection period data with MX-AOPC UA Logger software
4-port unmanaged switch built in for linking to Ethernet devices
I/O expansion port for daisy chaining up to 8 ioLogik E1200 units
3-in-1 RS-232/422/485 serial port for connecting to serial devices in the field
Supports SNMPv1/v2c/v3
Simplify I/O management with MXIO library for Windows or Linux platforms
Wide operating temperature range of -30 to 70°C (-22 to 158°F)

Introduction

The ioLogik 2500 is a smart remote I/O product with unique hardware and software designs, making it an ideal solution for a variety of industrial data acquisition applications. The ioLogik 2500’s hardware design includes a 4-port unmanaged Ethernet switch and 2 serial ports, enabling the ioLogik 2500 to seamlessly connect to a variety of field devices. One of the Ethernet ports can be used to link to 8 daisy-chained ioLogik E1200 expansion modules to provide more than 100 channels. The ioLogik 2500 acts as the “head” unit, with Click&Go Plus logic used to control the entire I/O array. Most importantly, the ioLogik 2500’s single IP is all that’s required to connect the entire I/O array to your network, providing the perfect solution for industrial field sites that have an insufficient number of IP addresses.

Powerful Control Logic from the New Click&Go Plus™
The new Click&Go Plus™ control logic now supports up to 48 rules with further upgrades to 8 conditions/actions. In addition, its graphical user interface provides 3 logic gates and 3 multi-layers, helping you build more powerful and efficient IO solutions.
Once you finish setting up your Click&Go Plus™ logic rules, IOxpress’s easy-to-use simulation function can be used to find potential errors in your Click&Go Plus™ rules before uploading them to your online devices. Peer-to-peer (P2P) mode is widely used for industrial applications. Traditionally, you would need to use P2P devices on both sides of the connection. However, if a configuration mismatch occurred between the P2P devices, the P2P connection would fail, after which you would need to spend extra time and effort to check the P2P settings. With IOxpress, all you need to do is set up the output device, and the P2P connection will be established automatically.

One IP for Multiple Expansion I/Os Gives You a Smarter Data Acquisition Solution
The ioLogik 2500’s unique IO expansion hardware design lets you link up to 8 ioLogik E1200 modules into a versatile I/O array with 100+ different I/O channels. The ioLogik 2500 acts as the perfect “head” unit, using Click&Go Plus logic to control the entire I/O array, and providing a single IP to connect the entire I/O array to your network.

VPN—Build a Reliable and Secure Cellular Communication Network

For security purposes, the ioLogik 2500-GPRS/HSPA also supports IPSec for building a secure VPN tunnel to the host station. With the help of VPNs, cellular devices acting as a VPN client can initiate a connection with a VPN server. Once the connection is established, cellular devices can communicate with other network devices on the same private network.

Powerful Datalogger and Value-added MODBUS Gateway
The ioLogik 2500 supports micro SD cards with up to 32 GB of memory, turning the ioLogik into a powerful datalogger for storing valuable data. And with a built-in FTP server, important data from field sites can be accessed remotely by different systems. In addition, the 2 serial communication ports can be used to input data from devices using the Modbus RTU protocol, and then transform the data into Modbus TCP or AOPC tag format before sending it out over the Ethernet network.

New MX-AOPC UA Server Efficiently Reduces System Response Time

The new MX-AOPC UA supports both UA server and DA server types. MX-AOPC UA server has a number of strengths. UA server provides a standard, state of the art security model, assuring your system’s security, and supports communication channels via the standard UA TCP port. This means that messages can be relayed through third party proxies. In addition, configuring the firewall is be easier, since you won’t need to worry about DCOM settings.
In addition, MX-AOPC supports both the traditional Modbus protocol and Moxa’s patented Push type communication. Unlike the traditional passive “pull” method, “active” messages are automatically “pushed” from the ioLogik 2500 to the SCADA system when the I/O state changes or pre-configured events occur. In this way, information can be accurately and efficiently pushed to the SCADA system as it becomes available.

• ioLogik 2512-HSPA Specifications
• Inputs and Outputs
Digital Inputs	8 channels
Configurable DIOs (by software)	8 channels
Isolation	3k VDC or 2k Vrms
• Digital Input
Sensor Type	Wet Contact (NPN or PNP) and Dry Contact
I/O Mode	DI or Event Counter
Dry Contact	• On: short to GND • Off: open
Wet Contact (DI to COM)	• On: 10 to 30 VDC • Off: 0 to 3 VDC
Common Type	8 points per COM
Counter Frequency	2.5 kHz
Digital Filtering Time Interval	Software configurable
• Digital Output
Type	Sink
I/O Mode	DO or Pulse Output
Pulse Output Frequency	5 kHz
Over-Voltage Protection	45 VDC
Over-Current Protection	1.5 A per channel @ 25°C
Over-Temperature Shutdown	175°C (min.)
Current Rating	500 mA per channel @ 25°C
DIO Output Leakage Current	< 1 mA @ 30 VDC
• Power Requirements
Input Voltage	9 to 48 VDC
Input Current	HSPA Model: 390 mA @ 24 VDC
• MTBF (mean time between failures)
Time	378,154 hrs
Standard	Telcordia SR332
• Common Specifications
• Cellular
Standards	GSM/GPRS/EDGE/UMTS/HSPA+
HSPA Model Band Options	• UMTS/HSPA+: five-band 800/850/900/1900/2100 MHz • GSM/GPRS/EDGE: quad-band 850/900/1800/1900 MHz
GPRS Model Band Options	GSM/GPRS/EDGE: quad-band 850/900/1800/1900 MHz
SIM Control Voltage	3/1.8 V
SIM Format	Full size
• LAN
Ethernet	• 4 switched 10/100 Mbps RJ45 ports • 1 optimized port for faster downstream communications with daisy-chained ioLogik E1200 units
Note	The optimized daisy-chain port is not supported by the ioLogik E1261W-T, E1261H-T, or E1263H-T.
Protection	1.5 kV magnetic isolation
Protocols	Modbus/TCP (slave), TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP
• Serial
Interface	2 RS-232/422/485 (software selectable) RJ45 ports
Parity	None, Odd, Even
Data Bits	5, 6, 7, 8
Stop Bits	1, 2
Flow Control	None, RTS/CTS, XON/XOFF
Baudrate	300 to 115200 bps
Protocols	Modbus/RTU (master/gateway), serial tunnel mode (client/server)
• Physical Characteristics
Wiring	I/O cable, 14 AWG (max.)
Dimensions	61 x 157 x 115 mm (2.4 x 6.18 x 4.53 in)
Weight	Under 1265 g (2.79 lb)
Mounting	DIN rail (standard), wall (optional)
• Storage
Expansion Slot	Up to 32 GB microSD™ memory card (SDHC compatible)
Note	For units operating in extreme temperatures, industrial-grade, wide-temperature SD cards are required.
• Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -30 to 70°C (-22 to 158°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Shock	IEC 60068-2-27
Vibration	IEC 60068-2-6
Altitude	Up to 2000 m
Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
• Standards and Certifications
Safety	UL 508
EMC	EN 61000-6-2/6-4
EMI	FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power 2 kV IEC 61000-4-6 CS: 3 V IEC 61000-4-8
Radio	R&TTE: EN 62311, EN 300 328, EN 301 489-1, EN 301 489-17, EN 301 893; NCC; VCCI
Hazardous Location	Class 1 Division 2; ATEX Zone 2
Green Product	RoHS, CRoHS, WEEE
Note: Please check Moxa’s website for the most up-to-date certification status.
• Warranty
Warranty Period	5 years
Details	www.anhnghison.com