Industrial DSL Ethernet Extender IEX-408E-2VDSL2 Series Moxa vietnam
Hãng sản xuất: Moxa
0902937088
Industrial DSL Ethernet Extender IEX-408E-2VDSL2 Series Moxa vietnam
Features and Benefits
- VDSL2 high-speed long distance copper connections; up to
300 m at 100 Mbps and up to 3 km at 1 Mbps over twisted-pair
copper wires - Automatic CO/CPE negotiation reduces configuration time
- Turbo Ring / Turbo Chain on both Fast Ethernet and VDSL2 ports for fast recovery
- Controllable bypass mode on VDSL2 ports gives higher availability in a daisy chain topology
- Flexible deployment with 2-pin or RJ11/45 connector on VDSL2 ports
- Easy network management by web browser, Telnet/serial console, Windows utility, ABC-02, and MXview
Introduction
The IEX-408E-2VDSL2 is an industrial managed Ethernet extender switch for establishing long distance Ethernet transmissions over twisted-pair copper wiring. This product can easily be linked in series to form a long distance multi-drop configuration, with one IEX-408E-2VDSL2 unit located at each drop-point. Adjacent drop points can be separated theoretically by up to 3 km, with a transmission speed of 1 Mbps achieved using a VDSL2 connection (with a connection distance of 300 m, a transmission speed of 100 Mbps can be theoretically achieved).
Each IEX-408E-2VDSL2 unit provides six 10/100BaseT(X) and two DSL ports, giving users an incredible amount of flexibility for linking together a wide variety of devices separated by vast distances. Ethernet redundancy is provided by Turbo Ring, Turbo Chain, RSTP/ STP, and MSTP, and a state-of-the-art controllable bypass solution on the DSL ports increases the system reliability and availability of your network. The IEX-408E-2VDSL2 series also supports advanced management and security features. It is the perfect solution for reducing the cost of establishing new network cable installations using existing twisted-pair copper wiring to extend copper cable networks beyond the conventional distance limitations imposed by the Ethernet protocol.
| Take Today, Add Tomorrow Worldwide References of the IEX Series Industrial Ethernet Extenders |
|
| As an alternative to investing in new cables for system upgrades, Moxa’s IEX Ethernet extenders provide users with greater flexibility for linking devices together over long distances using existing copper wiring. When costs need to be reduced, users can easily take the legacy system, and transform it into a modern network, while saving time and money. Read on to learn more details about worldwide user cases.........more |
|
.jpg){kind=small}
---------------------------------------------------------------------------------------------------------------------------------------------------------
| FAQ Is Your Network Infrastructure Ready for the IIoT? |
|
| The Industrial Internet of Things (IIoT) trend aims to improve efficiency and productivity by connecting different devices together as well as collecting and analyzing large volumes of data to offer accurate information. However, before reaping the benefits of the IIoT, users need to ensure that the correct infrastructure is in place. To make sure your network is ready for the IIoT, check out five of the most frequently mentioned questions........more |
|
| • Technology | |
| Standards | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for Flow Control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.3ad for Port Trunk with LACP ITU G.993.2 for very high speed digital subscriber line transceivers 2 |
| Management | SNMP v1/v2c/v3, LLDP, Syslog, RMON, DHCP Server/Client, DHCP Option 66/67/82, BootP. TFTP, SMTP, RARP, Telnet, SNMP Inform, Flow Control, Back Pressure Flow Control |
| Filter | 802.1Q VLAN, Port-Based VLAN, GVRP, IGMP v1/v2/v3, GMRP |
| Redundancy Protocols | STP, RSTP, MSTP, Turbo Ringv1/v2, Turbo Chain, Link Aggregation |
| Security | RADIUS, TACACS+, SSL, SSH |
| Time Management | SNTP, NTP Server/Client |
| Industrial Protocols | EtherNet/IP, PROFINET IO, Modbus/TCP |
| MIB | MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 |
| • Interface | |
| DSL Port | RJ11 (RJ45 connector) or detachable 2-contact terminal block |
| RJ45 Ports | 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
| Console Port | USB-serial console (Type B connector) |
| LED Indicators | PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (Fast Ethernet port), MSTR/HEAD, CPLR/TAIL, DSL BYPASS |
| Alarm Contact | 1 relay output with current carrying capacity of 1 A @ 24 VDC |
| Storage Port | USB storage port (Type A connector) |
| Button | Reset button |
| Digital Inputs | 1 input with the same ground, but electrically isolated from the electronics.• +13 to +30 V for state “1” • -30 to +3 V for state “0” • Max. input current: 8 mA |
| • Switch Properties | |
| MAC Table Size | 16K |
| Packet Buffer Size | 1.5 MB for Fast Ethernet side; 8 KB for DSL side |
| Priority Queues | 4 |
| Max. Number of Available VLANs | 64 |
| VLAN ID Range | VID 1 to 4094 |
| IGMP Groups | 256 |
| • Physical Characteristics | |
| Housing | Metal, IP30 protection |
| Dimensions | 74 x 111 x 135 mm (2.91 x 4.37 x 5.32 in) |
| Weight | LV Models: 1.23 kg HV Models 1.26 kg |
| Installation | DIN-rail mounting, wall mounting (with optional kit) |
| Altitude | Up to 2000 m |
| Note: Contact Moxa for products guaranteed to function at higher altitudes. | |
| • Environmental Limits | |
| Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements | |
| Input Voltage | LV Models: 12/24/48 VDC, redundant dual inputs HV Models: 110/220 VDC/VAC |
| Operating Voltage | LV Models: 9.6 to 60 VDC HV Models: 88 to 300 VDC, 85 to 264 VAC |
| Input Current | Max. 1 A @ 12 VDC Max. 0.48 A @ 24 VDC Max. 0.26 A @ 48 VDC Max. 0.097 A/0.050 A @ 110/220 VDC Max. 0.230 A/0.149 A @ 110/220 VAC |
| Connection | 5-pin terminal block |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Present |
| • Standards and Certifications | |
| Safety | UL 61010-2-201, EN 60950-1 (LVD) (In plan) |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | EN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV EN 61000-4-3 (RS): 80 MHz to 1 GHz: 10 V/m EN 61000-4-4 (EFT): Power: 4 kV EN 61000-4-5 (Surge): Power: 4 kV; Signal: 4 kV EN 61000-4-6 (CS): 10 V EN 61000-4-8 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Traffic Control | NEMA TS2 (In plan) |
| Rail Traffic | EN 50121-4 (In plan) |
| Vibration | IEC 60068-2-6 |
| • MTBF (mean time between failures) | |
| Time | 782,910 hrs |
| Standard | Telcordia (Bellcore), GB |
| • Warranty | |
| Warranty Period | 5 years |
| Details | www.anhnghison.com |
![Cables-CBL-M12[FF5P]-OPEN-100-IP67-Moxa-vietnam.jpg](/Images/products/thumb/Cables-CBL-M12[FF5P]-OPEN-100-IP67-Moxa-vietnam.jpg)
