Liên hệ tư vấn

Ms. Liên

lien.ans@ansvietnam.com

0902937088

lientran87

Thông tin sản phẩm
Thông số kỹ thuật

Client AWK-4121 Moxa vietnam

Note: The AWK-4121 standard models are being phased out. This notification does not apply to certain customized models, which we will continue to support. The phase out period is August 4, 2016, to May 4, 2017. Last buy orders must be received before April 4, 2017. Please contact your Moxa sales representative if you have further questions.

Features and Benefits

IEEE 802.11a/b/g compliant
Redundant dual DC power inputs or PoE
QoS (WMM) and VLAN for efficient network traffic
Supports long-distance data transfer and 100 ms Turbo Roaming
Complies with a portion of EN 50155 specifications
Rugged IP68-rated housing and -40 to 75°C operating temperature

-------------------------------------------------------------------------------------------------------------------------------------------------------

Looking for more benefits?

Our new AWK-4131A series offers the following additional benefits:

Fulfills high-bandwidth wireless application requirements with up to 300 Mbps data speed
Avoids downtime due to electrical interference with power and antenna port isolation
Provides uninterrupted operation with our wireless redundancy technology—AeroLink Protection
Utilizes 5-GHz DFS channels to avoid oversaturation of signals on channels and to provide stable wireless connections

Check out the AWK-4131A series product page for more information.

-------------------------------------------------------------------------------------------------------------------------------------------------------

Introduction

The AWK-4121 outdoor wireless AP/bridge/client is the ideal outdoor wireless solution for industrial applications that are hard to wire, too expensive to wire, or use mobile equipment that connect to a TCP/IP network. The AWK-4121’s dust-tight/weatherproof design is IP68-rated, allowing you to extend existing wired networks to outdoor locations and critical environments. The two redundant DC power inputs increase the reliability of the power supply and can be powered via PoE (discontinued starting with Rev. 2.0.0) for easier deployment. The AWK-4121 is compliant with the industrial standards and approvals, covering operating temperature, power input voltage, surge, ESD and vibration. With many hardened industrial-grade features, the AWK-4121 will provide stable and reliable wireless connectivity, even in harsh outdoor environments.

Features for Critical Environments

IP68-rated metal housing and -40 to 75°C wide operating temperature
Anti-vibration M12 design and waterproof/dust-tight RJ45 connectors
PoE (discontinued starting with Rev. 2.0.0) and dual DC power inputs

Specifications for Industrial-grade Applications

Long-distance wireless transmission over 10 km
Integrated DI/DO for on-site monitoring and warnings
Status LED indicators for on-site monitoring and diagnosis

Patent Marking

White Paper:

Expert Tips for Optimizing Industrial Wireless Networks

Compared with its popularity in everyday commercial environments, Wi-Fi has been slow to gain a foothold in industrial M2M applications. One of the main reasons that industrial customers are reluctant to move from wired to wireless is the problems associated with stability. Wireless transmission is NOT as reliable as wired transmission. However, by following certain best practices it is possible to set up a wireless network that will provide the level of reliability needed for M2M communication applications. In this whitepaper, we present eight expert tips that you can follow to optimize your wireless networks for industrial application environments...more

• WLAN Interface
Standards	IEEE 802.11a/b/g for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3af for Power-over-Ethernet* IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN
*Support for PoE discontinued starting with hardware Rev. 2.0.0.
Spread Spectrum and Modulation (typical)	• DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 11 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
Operating Channels (central frequency)	US: 2.412 to 2.462 GHz (11 channels) 5.18 to 5.24 GHz (4 channels) EU: 2.412 to 2.472 GHz (13 channels) 5.18 to 5.24 GHz (4 channels) JP: 2.412 to 2.472 GHz (13 channels, OFDM) 2.412 to 2.484 GHz (14 channels, DSSS) 5.18 to 5.24 GHz (4 channels)
Security	• SSID broadcast enable/disable • Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates	802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
TX Transmit Power (for hardware revision 1.1)	802.11b: Typ. 23±1.5 dBm @ 1 to 11 Mbps 802.11g: Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 36 Mbps, Typ. 18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54 Mbps 802.11a: Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps
RX Sensitivity (for hardware revision 1.1)	802.11b: -97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90 dBm @ 11 Mbps 802.11g: -93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -88 dBm @ 18 Mbps, -84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -76 dBm @ 48 Mbps, -74 dBm @ 54 Mbps 802.11a: -90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps, -85 dBm @ 18 Mbps, -83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -75 dBm @ 48 Mbps, -74 dBm @ 54 Mbps
TX Transmit Power (for hardware revision 1.0)	802.11b: Typ. 18±1.5 dBm @ 1 to 11 Mbps 802.11g: Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps 802.11a: Typ. 16±1.5 dBm @ 6 to 24 Mbps, Typ. 14±1.5 dBm @ 36 to 48 Mbps, Typ. 13±1.5 dBm @ 54 Mbps
RX Sensitivity (for hardware revision 1.0)	802.11b: -92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps 802.11g: -87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps 802.11a: -87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
• Protocol Support
General Protocols	Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols	ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
• Interface
Default Antennas	2 dual-band omni-directional antennas, 5 dBi at 2.4 GHz, 2 dBi at 5 GHz, N-type (male)
Connector for External Antennas	N-type (female)
RJ45 Ports	1, 10/100BaseT(X), auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Console Port	RS-232 (waterproof RJ45-type)
Reset	Present
LED Indicators	PWR, FAULT, STATE, WLAN, LAN
Alarm Contact (digital output, M12 female connector)	1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs (M12 female connector)	2 electrically isolated inputs• +13 to +30 V for state “1” • +3 to -30 V for state “0” • Max. input current: 8 mA
• Physical Characteristics
Housing	Metal, IP68 protection
Weight	1.5 kg
Dimensions	224 x 148 x 67 mm (8.82 x 5.82 x 2.62 in)
Installation	Wall mounting (standard), DIN-Rail mounting (optional), pole mounting (optional)
• Environmental Limits
Operating Temperature	-40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5% to 100% (non-condensing)
• Power Requirements
Input Voltage	12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet* (IEEE 802.3af compliant)
*Support for PoE discontinued starting with hardware Rev. 2.0.0.
Connector	M12 male connector with A-coding
Power Consumption	12 to 48 VDC, 0.121 to 0.494 A
Reverse Polarity Protection	Present
• Standards and Certifications
Safety	UL 60950-1, EN 60950-1
EMC	EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024
Radio	EN 300 328, EN 301 893, TELEC, FCC ID SLE-WAPA003
Note	Please check Moxa’s website for the most up-to-date certification status.
Rail Traffic	EN 50155*
*Complies with a portion of EN 50155 specifications. Please contact Moxa or a Moxa distributor for details.
• MTBF (mean time between failures)
Time	364,564 hrs
• Warranty
Warranty Period	5 years
Details	www.anhnghison.com